- You do not have any products in your shopping cart yet.
Main page » Lights » ROUND Lights » Lights 10/13mm series PIN » 10mm PIN Navigation Light, 3Wx2, SHORT
10mm PIN Navigation Light, 3Wx2, SHORT
Short high-performance light with 3Wx2 reference power as navigation light on small and medium-sized models. The penlight is delivered pre-assembled and ready for use on a CNC-manufactured aluminum heat sink, with 5 high-strength polycarbonate caps for free use:
1x 10mm cylinder cap
1x 10mm round cap
1x 13mm cylinder claw
1x 13mm round cap
and 1x profile extension 10mm
The caps can be glued separately and individually painted in the same color as the model. Any adhesive that does not evaporate is suitable for bonding, such as epoxy, Uhu Allplast, Uhu Por, silicone, canopy glue, ... Ideal as a flash on smaller Styrofoam models and helicopters ...
1x 10mm cylinder cap
1x 10mm round cap
1x 13mm cylinder claw
1x 13mm round cap
and 1x profile extension 10mm
The caps can be glued separately and individually painted in the same color as the model. Any adhesive that does not evaporate is suitable for bonding, such as epoxy, Uhu Allplast, Uhu Por, silicone, canopy glue, ... Ideal as a flash on smaller Styrofoam models and helicopters ...
Electricity: 3Wx2 reference power, 8(12)V, 0.2A
Beam angle: >160°
Light intensity: ~70 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Total Dimension: D10x37mm, flange D12mm
Dimension heatsink: D10x25mm
Weight: 4g (without cable)
Beam angle: >160°
Light intensity: ~70 Lumen RED
Light intensity: ~100 Lumen GREEN
Light intensity: ~200 Lumen WHITE
Total Dimension: D10x37mm, flange D12mm
Dimension heatsink: D10x25mm
Weight: 4g (without cable)
Ready to use with 1m silicon cable and series resistor for 2S, resistor for 3S enclosed, profiled expansion cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
TECHNICAL INFORMATION
CONNECTION
CONNECTION
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
